All part chutes are made of soft pliable vinyl material, which protects delicate parts from surface damage and can withhold temperatures up to 200 degrees. All Guideskirts come with complete mounting hardware.

MAC Part Chute Offerings
Mold Chutes & Guideskirts | Online Form | Download PDF |
---|---|---|
MD Series (Detachable Chute) | ![]() |
![]() |
MS Series (Soft Chute) | ![]() |
![]() |
SBS Series (Side by Side Chute) | ![]() |
![]() |
FR Series (Front/Rear Exit Chute) | ![]() |
![]() |
WSL Series (Walking Split Leg Chute) | ![]() |
![]() |
Available Options
Hi-Temp material for thermoset parts - Teflon Coated Kevlar 10 mil. Is used when parts ejected from the mold retain heat in excess of 300 degrees. (Note: Hi-Temp material is usually not required for thermoplastic parts that are cooled prior to release from the mold)
Magnets
- Part No. MAG01:
Set of (4) 2 3/4" Diameter by 3/8" thick 70 pounds pull force $28.00 - Part No. MAG02:
Set of (4) 2" Diameter by 3/8" thick 50 pounds pull force $24.00 - Part No. MAG03:
Set of (3) 2" Diameter 3/8" thick 50lb pull force $18.00
Guideskirts (Parts Chute)
Back to Models

MD Series Models
Model | Open | Width | Height | Chute Length |
---|---|---|---|---|
MD06 | 6" | 12" | 8" | 24" |
MD16 | 12" | 18" | 10" | 30" |
MD26 | 18" | 22" | 12" | 34" |
MD36 | 18" | 26" | 14" | 38" |
MD46 | 18" | 30" | 16" | 42" |
Note: Standard color is Gray. Yellow can be requested at no extra charge. |


MS Series - Soft Chute Guideskirt
Typical applications are conical or spherical shaped small parts below 200 degrees.
All Guideskirts are made of soft pliable gray bondcote material, which protects delicate parts from surface damage and can withhold temperatures up to 200 degrees.
MS Series Models
Model | Open | Width | Height | Chute Length |
---|---|---|---|---|
MS07 | 6" | 12" | 8" | 24" |
MS17 | 12" | 18" | 10" | 30" |
MS27 | 18" | 22" | 12" | 34" |
MS37 | 18" | 26" | 14" | 38" |
MS47 | 18" | 30" | 16" | 42" |
Note: Standard color is Gray. Yellow can be requested at no extra charge. |


SBS Series - Side by Side Chute Guideskirt
This unique design allows parts already separated on the mold to remain apart while directing them to the front of the machine without contamination, loss or damage.
SBS Series Models
Model | Open | Width | Height | Chute Length |
---|---|---|---|---|
SBS01 | 6" | 12" | 14" | 24" |
SBS02 | 12" | 18" | 16" | 30" |
SBS03 | 18" | 22" | 18" | 35" |
SBS04 | 18" | 26" | 20" | 38" |
SBS05 | 18" | 30" | 22" | 42" |
Note: Standard color is Gray. Yellow can be requested at no extra charge. |


FR Series - Front/Rear Exit Chute Guideskirt
Dual Soft Chute Guideskirt (Front/Rear Exit) - When clearance between the machine frame and base is limited this chute offers the solution to part separation on family molds where applicable.
FR Series Models
Model | Open | Width | Height | Chute Length |
---|---|---|---|---|
FR01 | 6" | 12" | 8" | 18" |
FR02 | 12" | 18" | 10" | 22" |
FR03 | 18" | 22" | 12" | 24" |
FR04 | 18" | 26" | 14" | 26" |
FR05 | 18" | 30" | 16" | 28" |
Note: Standard color is Gray. Yellow can be requested at no extra charge. |


WSL Series - Walking Split Leg Chute Guideskirt
Split Leg Guideskirt (Walking) Off-set legs permit directing parts into separate lanes on conveyors.
WSL Series Models
Model | Open | Width | Height | |
---|---|---|---|---|
WSL01 | 6" | 12" | 18" | |
WSL02 | 12" | 18" | 20" | |
WSL03 | 18" | 22" | 22" | |
WSL04 | 18" | 26" | 24" | |
Note: Standard color is Gray. Yellow can be requested at no extra charge. |
Contact our Customer Service Team at 800-435-6979
or