Z Style Aluminum Conveyor

Request a Quote...

 

The Horizontal to Incline to Horizontal Conveyor Series is a profile used for industrial part applications where cleanliness and appearance are important. This conveyor is ideally suited for beside the press applications to remove parts from under the machine or transition from another conveyor and elevate up to another piece of equipment or discharge for inspection or assembly. The angle of incline and the discharge horizontal sections are adjustable from 20 to 55 degrees for elevation changes. The model's superior construction produces a solid square frame for industrial use.

 

Exclusive Series Features:

• Frame: Extruded aluminum frame, 6061 aluminum with T5 temper, clear anodized
• Cross Members: Steel cross members for exceptional torsional rigidity
• Casting:Supports bearings and pulleys featuring a Unique take-up design tracking adjustments at the four corners
• Pulleys: Feature a machine trapezoidal crown on head and tail, with v-guide groove for increased tracking.
• Bearing Assembly: Set in castings with covers, no exposed rotating parts
• Slider Bed: Standard with soft drop zone optional.
• Warranty: Five year limited

 

Technical Specifications:

• Frame: 2.63" extruded frame with welded steel tubular cross members, standard stainless steel slider bed for full belt support.
• Belt Widths: 6" to 36" on 2" increments (standard)
• Length: 6' to 24' on 6" increments (standard)
• Drive: Located at any one of the four corners, dependent upon length and application. 
• Pulley: 2.125" drive and idle pulleys are both machines with trapezoidal crowns, shafts are 3/4" diameter and bearings are sealed self-aligning type
• Take-up Assembly: Allows for 2.5" of take-up of belt adjustment 

 

Common Options:

• Casters: Two-way, toe locking swivel casters with 4" diameter polyurethane wheels.
• Variable speed drives: AC variable speed drive packages for different input voltages.
• Belts: Wide selection of various belt materials and surface textures.
• Cleated Belt: Standard polyurethane belts with either 20, 30, 40, 50 or 60 mm tall cleats. 
• Reversing Packages: Automatic processing reversing control packages.
• Indexing Packages: Automatic belt indexing packages.
• Side Rails: Side rail height and materials.
• Covers for Top of Conveyors: Polycarbonate & stainless steel covers.
• Covers for Bottom of Conveyors: Bottom covers - painted steel & stainless steel.
• Conditioning Units: Ambient air blowers and chilled water fed cooling blowers.
• Supports: Extruded aluminum construction legs with adjustable heights available