Steel Conveyor

The “Small Frame Steel” belt conveyor series is a profile that is used for light weight finished part applications, where

cleanliness and appearance are important. This conveyor is ideally suited for under-the-press application of small to

medium sized injection molding machines, general purpose light weight parts. The models superior construction

produces a solid square frame for industrial use.

Exclusive Series Features:

Frame:: 2.63” Powder coated steel framewith welded steel tubular cross members, optional steel slider bed for full belt support.
Cross Members:: Steel cross members for exceptional torsional rigidity
Casting:: Supports bearings and pulleys featuring a Unique take-up design tracking adjustments at the four corners
Side Rail Overlap:: Recessed belt edges - .375" per side
Pulleys:: Feature a machine trapezoidal crown on head and tail, which provides increase tracking signal
Bearing Assembly:: Set in castings with covers, no exposed rotating parts

Belt Edge Wear Strips:: Wear Strips on top and return sides, less belt damage on convey and belt return side
Warranty:: Five year limited

Frame: 2.63" Powder coated steel framewith welded steel tubular cross members, optional steel slider bed for full belt support.
Side Rails: 2.5" extruded aluminum side rails with top return, overlap is .375" per side.
Belt Widths: 6", 12", 18", 24", 30", 36" (standard).
Length: 3' to 15' on 1 foot increments (standard).
End Drive: Located at any one of the four corners, dependent upon length and application. Positions M3, M4, are preferred, M1, M2, are available if applicable, side mounted drives, M5, M6, M7, M8 are also available as an option. Standard drives are 120VAC/1/60 HZ motors.
Speeds: 22 FPM (standard), 9.5, 14.5, 32, FPM - available at no charge.
Pulley: 2.125" Drive and tail pulleys are both machines with trapezoidal crowns, shafts are 3/4" diameter and bearings are sealed self-aligning type.
Take-up Assembly: Allows for 2.5 inches of take-up of belt adjustment.
Electrical Control: NEMA 1 enclosure with push button manual motor starter with thermal overload protection and 12' of SJ 16/3 cord with plug for 120VAC power as standard.
Supports: Various telespar type legs extruded construction with adjustable heights available.