
Used for medium weight, finished part applications. This conveyor is ideally suited for most industrial applications to move parts from under the machine or transition from another conveyor and elevate up to another piece of equipment or discharge for inspection or assembly. The angle of incline is adjustable up to 60 degrees for elevation changes. The fully welded frame construction of this model produces a solid square frame suitable for industrial use.
Exclusive Series Features:
- Frame:
- Formed C-channel steel frame with welded cross members
- Castings:
- Supports bearings and pulleys, featuring a unique design for easy service and belt tracking adjustments
- Side Rail Overlaps:
- Recessed belt edges, .625" per side on 18" width or less, and 1.625 on 24" and 30" wide
- Cleated Belt:
- Standard polyurethane belts with either 20, 30, 40, 60 mm tall cleats on 15" centers
- Pulleys:
- Feature a machined trapezoidal crowned on head and tail which provides increased tracking signal
- Motor Starter:
- Includes manual push button with thermal overload
- Hole Patterns:
- Pre-punched pattern on bottom of frame for repositioning leg supports along the frame length
- Warranty:
- Five year limited

Technical Specifications:
- Frame: height, 13 gauge welded C channel steel frame fabricated with welded steel tubular cross members, optional steel slider bed for support. Incline frame section is adjustable up to 60 degrees
- Side Rails: 5″ extruded aluminum side rails without top return, overlap is .625″ per side, or 1.625″ per side on 24″ and 30″ wide models. Belt widths greater 18″ have a R16, 3.5″ tall stainless steel rail as a standard
- Belt: 2 ply white FDA Approved P.U. cover, Anti-Static with ¾″ cleats welded on 15″ centers, splice is endless bias angle skive type
- Belt Widths: 6″, 12″, 18″, 24″, 30″, 36″ (standard)
- Length:Combined Lengths to a max. of 15′ (2′ min on drive) and (2.5′ min. on take-up end), manufactured in 1′ increments (standard)
- End Drive: Located at in-feed end, M1, M2, are standard M9, M10, M11, M12 are available at no charge. Side drive positions M5, M6 are available. Positions M3, M4, M13, M14, M7, M8 are available if applicable (please consult factory) Standard drives are 120VAC/1/60 HZ motors
- Speeds: 22 FPM (standard), 45, 67, 133 FPM - available at a nominal charge
- Pulley: 3″ Drive & tail pulleys are both machined with trapezoidal crowns, shafts are 5/8″ diameter and bearings are sealed self-aligning type, no lubrication required. Drive pulley is fully lagged
- Take-up Assembly: Allows for 2.5 inches of take-up of belt adjustment
- Electrical Control: NEMA 1 enclosure with push button manual motor starter with thermal overload protection and 12′ of SJ 16/3 cord with plug for 120VAC input power as standard
- Supports: Steel telescoping type supports, LS2 series included with CA3 (4″ diameter swivel toe locking casters) Elevation is 11.9″-16.9″ top of belt to floor with cleats up to 30 mm tall
- Paint: Powder coated industrial finish (other colors available as options)
Common Options:
Drive Motor Location: Motor locations for special elevation requirements or functions
Variable speed drives: AC and DC type variable speed drive packages for different input voltages
Belts: Wide selection of various belt materials, cleat heights, spacing, and V-guides
Reversing Packages: Automatic processing reversing control packages
Indexing Packages: Automatic belt indexing packages
Side rails: Alternative side rail height and materials
Covers for Top of Conveyors: Polycarbonate & stainless steel covers
Covers for Bottom of Conveyors: Bottom covers- painted steel and stainless steel
Conditioning Units: Ambient air blowers and chilled water fed cooling blowers


Contact our Customer Service Team at 800-435-6979
or
This email address is being protected from spambots. You need JavaScript enabled to view it.