View Cart (0)

800-435-6979

CALL TOLL FREE in USA

+1 (815) 337-3000 local

Screw Type SeparatorScrew Type STSF Separator

 

Request a Quote

 

Screw Type Separators

A screw type separator is used to separate small parts form sub-runners, ideally suited for small to medium number of cavities and runners. A gap separation method is used between the screw and the adjustable angle slide plate. The smaller (shorter of the two pieces) fall through the gap.

NOTE: Multi-Screw Separators are available to handle difficult separation and higher volumes. Consult factory.

  

Applications

Designed for small parts and sub-runners with low volumes, typically where the runners or parts are larger in vertical height than the corresponding parts and or runners. Consider selecting the 24" long model when using a 12" wide or narrower conveyor. If using a 18" wide or narrower, please consider the use of the 36" long unit, or use the 36" long unit when having a medium number of cavities and sub-runners. Special Note: a special two tier STS-E series can be devised to increase resonance time for high numbers of cavities and faster cycles.

 

 

Screw Type Separator Reference Dimensions
 

 

Features and Specifications

  • Modular extruded aluminum frame construction
  • Adjustable stainless steel guard over the top of the rotating helical screw, provides gap adjustment for part size and extends the life of the polyurethane fingers.
  • Clear LEXAN guard on the back-side of the unit, which allows viewing of separation process.
  • Stainless steel adjustable angle slide plate, easy access, industrial strength, single point adjustment with side locking mechanism. Adjustment allows for various sized parts and runners.
  • Machined UHMW Polyethylene helical screw, 24", 30" & 36" long, extends beyond the slide plate, thereby allowing parts or runners proper clearance to exit the unit.
  • Flight is 2-3/16" long x 3/16" tall - may be modified for applications.
  • UHMW screw has a variable speed rotation through a speed control dial.
  • Removable and polyurethane fingers are included to create tumbling action. The "fingers" are located with a setscrew and can be trimmed per application.
  • operator safety through low stall torque.
  • Telescoping legs with standard 19" min. to 32" max. adjustable height range
  • Discharge height of bottom of slide tray to floor is 5.25" min. to 16.5" max., less options
  • (4) four - 4" diameter swivel, polyurethane, non-marking wheels with toe locking casters, provides portability.
  • Supply power requirements: 110 VAC/60/1 input power
 

 

Screw Type SeparatorScrew Type Separator
 

Contact our Customer Service Team at 800-435-6979

or

This email address is being protected from spambots. You need JavaScript enabled to view it.

Download Our Brochure

Download our 2017 PDF product brochure (7MB file) using the image link above. To make an order, please contact us or request a quote.

spi-member

spe 1